Home>Bearing knowledge>How to buy and use seals

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

How to buy and use seals

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

When purchasing and using seals, users should always pay attention to the following requirements to prevent unnecessary quality problems:
1. Through the rigorous selection and long-term experience, we have a series of supply channels. Our supply is the most comprehensive in the seal profession, so we can check the quality of production. Adhere to the level of stable high quality. Coupled with our insistence on the quality of seals, we will not blindly seek high profits and dedication to the customer's demand for seal quality.
2. If we are standing in the customer's attitude and producing seals, it is necessary to pay attention to whether the supplier or the seal shop can know how to look after the seals. If the supplier is not properly stored, it can be a sealed seal. Pieces, due to the storage of seals, there is a specific set of requirements, such as storage room temperature is preferably below 30 degrees Celsius, to prevent high temperature aging of seals; seals need to be stored in sealed packaging to prevent moisture in the air or Dust touch; seals need to avoid strong light, prevent seals from being corroded or premature by ozone in the air, so we advocate that when customers choose suppliers to buy, it is necessary to observe whether the seals can be stored stably, otherwise sealed The high-quality seals that the factory can supply, and the seals that can only be discarded in the hands of the customers.
3. Described in the use of high-quality seals, many customers have chosen lower-level products in the guiding and dust-proof parts in order to reduce the cost, and then the leakage of the rod seal due to the cylinder swing or foreign debris damage, please Ask us about the product to prevent wasting high quality seals.
4. The most important thing when installing the device seal is to prevent damage to the seal. In addition to proper finish, safe chamfering, removal of burrs, and proper things, how to prevent dust from falling on the seal surface during the installation process, When the device is properly placed such as a piston seal to prevent crushing seals, sanitary hydraulic media, etc., if the user has any doubts about this, we can provide a clear and simple device guide for the seal manufacturer.
5. After using many users, after the completion of the process, even if the equipment has passed the test, it will still be a problem after being sent to the user for a period of time. Under normal circumstances, it can be improperly formed, for example, the oil temperature is too high to cause sealing. If the piece is burned, you can check whether the cooling system can operate normally. The outer surface of the tie rod is worn and leaking. You can check whether there is any debris in the hydraulic oil and whether the filter can be invalid.
It can be seen from the above various situations that the users are willing to pay higher value to purchase high-quality seals, and they must also be manipulated and supervised in all aspects to ensure that the payment will not be sloppy, select professional producers; establish long-term cooperation. Partner; it is necessary

---

Recommend to friends comments close window

Bearing related knowledge

Correction of the closed bearing oil hole of the imported bearing. Misunderstanding about the inspection and inspection and quality of KOYO imported bearing Koyo bearing correct device and operation fault view KOYO bearing appearance and outer surface quality bearing description of the cause of damage and matters needing attention

This article links to http://
Please indicate the bearing network http://

Previous: What combination of combined bearings?
Next: Features of NSK Wheel Bearing Units